"FURAI MODEL" OPTIMUS PRIME IDW ver. has been released in January!

IMG_0085

 

Hi, guys. This is my first time writing this blog.

 

The first day working in FLAMETOYS office, I was asked to make the model of "FURAI MODEL" OPTIMUS PRIME IDW ver.

 

For a model kit beginner like me, I even didn’t know what a “Model Kit” means.

A “Model Kit” is that you have to build it yourself.

Although I’ve assembled one when I was a child, It was an easy one as I remember.

However, it seems not too difficult to assembly.

 

 

First, here is the package.

IMG_0083

Here is the runner parts.

IMG_0084
I was handed a nipper to separate parts from runners.
It surprised me that I can cut it off so easily with a 
nipper or a cutter.

As about 
the stickers, I
 used a toothpick to stick it right to the correct place.
To 
prevent the sticker from easily being peeled off, I also used a toothpick to glue it on parts.



Size from bottom to top head is approximately 16cm.

IMG_2127

 

2 different type of hands are included which makes it availible to grip the weapon.

0636
IMG_0088


 

In fact, a senior in FLAMETOYS office assembled one without any instructions.

What a difference between a beginner and an experienced modeler!

 

Even so, it sure is a simple one for assembly since a beginner like me can assembly it on my own.

 

 

Even though this Furai Model cannot transform, over 40 movable joints were designed to make it possible to set a variety of poses.

 IMG_2121

IMG_2122

IMG_0046

 


Together with Thunder Cracker.
IMG_0052
The size of Optimus Prime is approximately 16cm while the 
size of Thunder Cracker is 15cm.


 

Since the product released in January 2019, you can get it easily from the online marketplace!!

 

↓↓Get it via the following links↓↓

 

"FURAI MODEL" Optimus Prime (IDW ver.)

D4toys :
http://www.d4toys.com/index.php?route=product/product&path=427&product_id=746

ET-Toys :
http://et-toys.com/index.php?route=product/product&product_id=617 

[Furai Model] 03 - Optimus Prime (IDW ver.)

Release date:

December, 2018 → January, 2019

Availability:

In Stock

Material:

ABS, POM, PA, PE



"FURAI MODEL" Thunder Cracker
D4toys :
http://www.d4toys.com/index.php?route=product/product&path=427&product_id=761
ET-Toys :
http://et-toys.com/index.php?route=product/product&product_id=622

[Furai Model] 05 - Thunder Cracker

Release date:

May, 2019

Availability:

Pre-Order

Material:

ABS, POM, PA, PE




© 2018 Hasbro.All Rights Reserved.

The other day, the sample of [風雷模型] "OPTIMUS PRIME(ATTACK MODE)" has arrived in FLAMETOYS office!
DSC04881

This time I will introduce the product while making the model kit of OPTIMUS!!
※By the way, I am a model kit beginner

To first, shoot the package. The box size is approximately W31×D19×H8cm.
DSC04883DSC04884

The first thing to check after unpacking is checking to see if any accessories are missing!It is very important so do not forget it!!
DSC04885
DSC04888
The runner parts are divided for each color, and I think that the instructions do not worry because it is full color.

Although there is explanation as "simple assembly", I think that it is really simple whether the author of the model kit beginner will experience it!! I wish modellers watch warmly.
DSC04897

There is FLAMETOYS logo on the runner and  the number of runner next to the logo.
DSC04887
DSC04898


I assemble in order Body→head→arms→legs and combine these at the end.
DSC04917
Because I'm a "super" beginner, it took about 1 hour to make its body and head.
The point that I personally struggled is the sticker sticking work.I sloved it by using a toothpick.
DSC04904

I think there are people who notice when cutting the runner, but indirect parts are molded slightly softer.This soft part enables smooth posing. For example, like this parts.
DSC04901

Here is a part from shoulder to arm. Shoulder and elbow range of motion is outstanding!!
DSC04920
DSC04921

Part of legs,although the number of parts will increase a little, the movement range of knee,ankle and toes is enough!! Of course, the tires also tune!!
DSC04938
DSC04939

Joining method is very simple.You should only adjust the round convex into round dent. Especially indirect parts are made of soft parts as mentioned above and it is fine even if it pushes deeply.
DSC04936


And, finally the whole picture reveals...!
DSC04926DSC04927
DSC04924
It will be understood at this point that the hip joint,waist,breast and neck is well operated!! It works well, but it's a model kit!

We were paticular about that OPTIMUS' eyes and the window are injected with clear parts.Because it is hard to understand with the photograph, please confirm with the real product by all means!!

Since different parts are prepared for the hand, use this part if you want to use weapons. OPTIMUS can also have weapons on hand, so please enjoy it in your favorite way.
DSC04890

As the time is limited, the assemble review is over.I think that it was a little unsatisfactory for modelers, but thank you for reading to the end!!

Since the product is scheduled to ship in September, please wait for a while until arrival.


© 2018 Hasbro.All Rights Reserved.


FLAMETOYS's model kit series 風雷模型 [FURAI MODEL] 2nd product is...
『STARSCREAM』is preordering now!! Today we introduce about him!!
08_0041
08_0067
Its size is from bottom to top head is about 150mm.
08_0132
STARSCREAM is designed by Mr.Akira Amemiya from TRIGGER same as 『OPTIMUS PRIME(ATTCK MODE)』, this is a modernized and shape optimized STARSCREAM.

20170919-1

Also this time too, good articulation with over 40 movable joints, you are able to set any pose easily.Joint is made of soft plastic so it will have a stable movable performance.
08_0166
08_0169

08_0089
You can also remove the weapons and play with your STARSCREAM taking a pose you like!!
08_0173
08_0184

”I am Decepticon's new leader from now!!"
08_0137
Please check website and don't forget your reservation!!

※This product is a plastic model kit. Images show a coloring example from professional painter. Actual product requires assembling and coloring.


風雷模型[FURAI MODEL] STARSCREAM
Release date: October, 2018
Size:Approx.150mm
Material: ABS,POM,PA,PE
Packing: 310×190×80 mm (may differ from final product)
DjFA2DnV4AA0c_W

Here is the pre-order information :
Official retail price : US$40.00

D4toys.com selling price : US$36.00(Pre-order discount price)

D4toys.com 風雷模型[FURAI MODEL] STARSCREAM website
http://www.d4toys.com/index.php?route=product/product&path=427&product_id=729

And you can also get it on ET-toys' site!!
http://et-toys.com/index.php?route=product/product&product_id=613


© 2018 Hasbro.All Rights Reserved.

↑このページのトップヘ